Protective properties:
- protection from general industrial contamination
- protection against mechanical impact (abrasion)
- protection against petroleum products of light fractions, Class 1
- for protection against short-term exposure to an open flame, À1+À2
- protection against static electricity
Jacket + trousers
Jacket
- Straight-fit elongated jacket.
- Central double slider zipper, inner placket and a storm flap secured on snap buttons.
- Band collar
- A removable hood with adjustments in two directions is attached to the collar using snap buttons. The hood can be worn over a hard hat.
- Cuffed sleeves with a snap button for width adjustment.
- The sleeve construction corresponds to the main position the arm takes while working, making it more comfortable to work and therefore the arms get less tired.
- A drawstring on the back allows you to adjust the width of the jacket along the waistline.
- Pockets:
- 2 lower side pockets with flaps,
- 1 inner chest pocket with a button closure.
- Loops for attaching a walkie-talkie on the right and left side of the chest.
Trousers
- Zip fly and jeans button closure.
- Waistband with belt-loops. An elastic band on the waistband in the area of the back halves for volume adjustment.
- Pockets: 2 front pockets and 1 back pocket.
- Darted knee patches can serve as pockets for shock-absorbing pads.
Main fabric: antistatic (100% cotton, including antistatic yarn Nega-Stat®) with fire-resistant Proban® finishing, with oil-water-repellent finishing, density 250 g/m2, made by Klopman (Italy), color: navy blue.
Trim fabric: MEGATEC-250H antistatic cotton-rich blend (75 % cotton, 25 % polyester, including antistatic yarn Nega-Stat®), with fire-retardant Proban® finish, density 250 g/m2, manufactured by Klopman (Italy).
Signal elements: retroreflective fire-retardant stripes 50 mm wide and inserts.
Color: navy blue, trim - cornflower blue, red.
Sizes: 88-92 to 128-132, Heights: 158-164 to 194-200.
! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link
TR CU 019/2011