Absolute
high visibility raincoat (fluorescent yellow with dark blue)

The raincoat conforms to Class 3 of high visibility clothing

The waterproof qualities of the raincoat are ensured by its special design: waterproof fabric and bonded waterproof seams. Thermoactive reflective tape is used on the raincoat and applied by a thermal printing method to prevent needle puncturing. Raincoat is of optimum size allowing it to be put on over summer clothing as well as over winter clothing. Back yoke ventilation and ventilation eyelets in armpit areas. Hood with a drawstring along the face opening has a reflective tape in the shape of an arrow allowing the wearer to be seen from above – a crucial feature for airport technical services. Straps sewn into the cuffs (patas) allow for width adjustment against wind and moisture penetration.

Shell layer fabric: 100% polyamide, membrane: (LT-membrane™, water resistance 6,000 mm waterproof rating, water vapor permeability 6,000 g/m² per 24 hours), windproof, breathable, cold-resistant, density 150 g/m².
Fluorescent fabric: ABSOLUTE (100% polyester), membrane: (LT-membrane™, water resistance 6,000 mm waterproof rating, water vapor permeability 6,000 g/m² per 24 hours), windproof, breathable, cold-resistant, density 170 g/m².
Reflective material: 5 cm wide band – provides maximum visibility at night and other reduced visibility conditions.
Color: fluorescent yellow with dark blue.
Sizes: 88-92 to 128-132, Heights: 170-176 to 182-188.

! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link

TR CU 019/2011
GOST 12.4.281-2021 for high visibility clothing
GOST R 12.4.288-2013 Special clothing for protection from water