Jacket + bib overall
Protective properties:
Íñ – protection against chemical factors : crude oil protection, class 2
Íì – protection against chemical factors: heavy fraction petroleum products and petroleum oils, class 2
Íë – chemical factors protection: light petroleum products, class 1
Ê80 – protection against chemical factors: acid concentration no more than 80%, class 3
Ù20 – Provide protection against chemical factors: oil acid and alkaline solutions of up to 20% concentration
Òíâ – protection against reduced air temperatures and wind, Class 3(4)
Ýñ – protection against static electricity
Ìè – against mechanical impact: abrasion
Ç – protection from general industrial contamination
The suit is made of membrane antistatic fabric and provides a high level of protection against chemical factors, including crude oil, while being lighter in weight compared to padded suits made of polymer-coated materials.
Coat with combined 3-layer insulation (3×150 g/m2): stitched – 1 layer, removable – 2 layers.
- The coat combines two functions: mid-weight and insulated.
- The central closure is a durable two-way zipper with a wind flap on the outside, which is secured with buttons, and an internal placket under the zipper. Double slider zipper allows unzipping from the bottom for convenient working in a sitting position.
- The hood is insulated, removable with a zipper, with volume adjustment in two directions. A visor and a high Velcro chin guard protect your face from the elements and wind.
- The hood can be worn over a helmet.
- The stand-up collar is insulated with a Velcro wind flap, the inner stand and upper part of the inner placket are made of soft fleece for comfort and warmth.
- The sleeve construction corresponds to the main position the arm takes while working, making it more comfortable to work and therefore the arms get less tired.
- Sleeve cuffs with elastic tape and knitted wristbands with a removable insulating lining effectively retain warmth.
- An elastic band on the back along the waistline and a drawstring at the bottom of the coat ensure a snug fit and help retain warmth.
- There are different wearing options for the walkie-talkie on the jacket:
- loops on the chest on the right and left,
- chest pocket with Velcro flap on the right;
- a special insulated pocket with an entrance under the windproof flap - due to the warmth of the underwear space in such a pocket, the battery discharges more slowly than in the cold.
- Other pockets on the jacket:
- 1 universal chest pocket for a badge or a pass;
- 2 lower side pockets with flaps;
- 4 internal chest pockets – 2 each on the stitched and on the removable lining of the jacket.
Bib overall with 2-layer insulation (2×150 g/m2)
- The fastening is with a two-way zipper, the flap is fixed with Velcro.
- Shoulder straps with elastic inserts and adjustable length provide comfort when bending over and sitting.
- Elastic tape on the back along the waistline ensures a tight fit.
- Volume in the knee area created by a special cut for comfort when working in a sitting position.
- Fabric inserts with a zipper at the bottom of the side seams for ease of putting on trousers over high-collar boots.
- Pockets:
- 1 vertical chest pocket with Velcro flap;
- 2 lower side.
Outer layer fabric: OXFORD NEGA STAT (98% polyester, 2% antistatic thread (Nega-Stat®)), with oil-water-repellent finish and antistatic properties, membrane (water resistance 5,000 mm water rating, vapor permeability 5,000 g/m2 in 24 hours ), density 175 g/m2.
Insulation: FEELGOOD MICRO 150 g/m2, coat – 3 layers (1 stitched and 2 removable), bib overalls – 2 layers.
Lining: 100 % cotton.
Signal elements: retroreflective stripes 50 mm wide.
Color: navy blue with cornflower blue trim.
Sizes: 88-92 to 128-132, Heights: 158-164 to 194-200.
! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link
TR CU 019/2011
GOST 12.4.310-2020
GOST 12.4.303-2016
GOST 12.4.251-2013
3(4) protection class against reduced air temperatures and wind