RUDA
men’s mining work suit, type B

Type B, is intended for work in underground mining.

Protective properties:

• Пн - protection from non-toxic dust
• Эс - antistatic
• Ми 3 - against mechanical impact (chafing) and general industrial contamination
   
• Straight-fit jacket, elongated.
• Concealed button fastener.
• Band collar jersey backside for comfort.
• Outer patch pockets with concealed button closure, a breast pocket for a flask.
• Breast inside hang pocket with a button closure.
• Back waist drawstring for volume adjustment of the jacket.
• Elastic cuff sleeves.
• Ventilation eyelets in armhole.
• Reinforcement patches cover shoulder seams and elbows.
• Retroreflective tapes around the torso and sleeves at the chest and bottom levels.
   
• Straight-fit trousers.
• Zip fly and button closure.
• Wide heat-insulated waistband with belt-loops for a belt and supporting belt (completed with trousers).
• Detachable, length adjustable bib strap with an elastic insert for comfortable wear when bending.
• Side patch pockets with flaps with concealed button closure.
• Reinforcement patches against chafing in the knee area and on upper back parts of the trousers.
• Detachable supporting belt with velcro closure.

Main fabric: cotton blend (60% cotton, 40% polyester, including antistatic yarn) with water-repellent finish, density 300 g/m².
Fabric of reinforcement patches: OXFORD ANTISTATIC MET (100% polyester, including antistatic yarn), with oil-water repellent finish and water-resistant PU coating, density 175 g/m².
Insulation layer (for the belt): polyester batting 150 (100% polyester), density 150 g/m².
Reflective elements: retroreflective tape of 50 mm wide.
Color: grey, reinforcement patches – black.
Sizes: 88-92 to 128-132, Heights: 158-164 to 182-188.

! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link

TR CU 019/2011
GOST R 12.4.299-2017