SIBERIA-3
men's insulated jacket

Protective properties:

• Тнв protection against reduced air temperatures and wind, Class 4
• Ми З protection against mechanical impacts (abrasion) and general industrial contamination

Key features:

• Jacket with 3-layer insulation (3×120 g/m²): 1 layer stitched and 2 layers on a removable insulating lining.
• Straight fit.
• Removable hood, fastened to the neck of the jacket with a zipper, adjustable in two directions – along the faceline with a drawstring and in height with a Velcro patch.
• The hood with a single layer of insulation and a soft fleece lining protects from the cold.
• A detachable faux fur trim and a high chin part of the hood protect the face from precipitation and wind.
• The stand-up collar is lined with soft fleece for comfort.
• Central fastener with a strong two-way zipper with a windproof valve, which is fixed with secret snaps. Double slider zipper allows unzipping from the bottom for convenient driving and working in a sitting position.
• The inner placket wraps around the top of the zipper slider and, thanks to the fleece trim on the top, prevents the zipper from touching the skin.
• The sleeve construction  corresponds to the main position the arm takes while working, making it more comfortable to work and therefore the arms get less tired.
• Sleeves with cuffs that are lined with fleece on the inside. The volume of the cuffs is adjusted with Velcro tabs.
• Rib-knit cuffs on the sleeves of removable insulation keep you warm.
• Zippered mesh in the armholes for thermal comfort.
• Drawstrings at the waistline and at the bottom of the jacket, as well as a drawstring at the waistline of a removable insulating lining, allow you to adjust the volume of each part of the garment, providing a better fit and additional protection against wind and cold.
• Lining on removable insulation on the back and upper parts of the shelves – with "smart" thermoregulation technology: a special dotted silver coating effectively reflects the heat of the human body, which increases the heat-preserving properties of the garment without increasing the thickness of the insulation.
• Removable insulation is attached to the jacket with a zipper and lace with snaps.
• Outer pockets:
  • 2 chest oblique-vertical with zippers;
  • 2 lower pockets with volume, with flaps on snap buttons, with two openings – from above and from the side, the side opening is fixed with a concealed snap
  • 1 zippered pocket on the lower part of the left sleeve with – for a pass;
  • 1 inside A4 breast pocket with a zipper under the outer flap – no need to unbutton the jacket to get your documents.
• Inside front pockets with both stitched and removable lining:
  • 2 chest pockets with zippers with additional compartments for a smartphone and keys (inside – a cord with a carabiner);
  • 1 inner, located at the bottom left, made of mesh, pulled together with elastic band on top and fixed with a button.
• To increase visibility at night, the jacket features  retroreflective inserts and piping below the yokes and in the lower part of the sleeves in front and back - it perfectly indicates the position of a person in the dark.

Outer layer fabric: POLYRIB H (100% polyamide), membrane (Lt-membrane™ , water resistance – 6,000 mm waterproof rating, water vapor permeability – 6,000 g/m² per 24 hours, windproof, breathable, cold-resistant, water repellent coating, density 180 g/m².
Insulation: Shelter® Micro 150 g/m², 3 layers. The multi-layer insulation provides a greater heat-insulating effect due to the air gap between the layers.
Hood trimming: faux fur.
Lining: 100% polyester, density 60 g/m², combined – black and with a special silver dot coating, which, by reflecting the heat of the human body, allows you to keep it under the garment.
Retroreflective elements: retroreflective inserts and piping.
Color: black, trimming – dark gray.

TR CU 019/2011

Class 4 protection against reduced air temperatures and wind