VOLT L 160-6
shirt jacket

• Protection level 2
• ЗЭТВ 14 cal/cm² - protection against thermal effects of an electric arc, the value of arc thermal effect
• То (А1+А2) - protection against high temperatures, against short-term exposure to an open flame
• Тт (protection level B2) protection against high temperatures, convective heat
• Ти (protection level C1) protection against high temperatures, radiant heat
• Ми – protection  against mechanical impact, chaffing
• З –  protection against general industrial contamination

• Straight fit.
• Central concealed fastener with buttons on the side and Velcro on the collar. 
• At the top of the side, the label "BUTTON UP!” - an additional warning sign for a person.
• Turn-down band collar.
• Pockets - breast with flaps and Velcro.
• Long- sleeved shirt with extra space in the elbow area. The sleeve conforms to the main position of the welder's hand, which reduces fatigue during work.
• ​An insert below the elbow seam covers the sleeve vent and protects against possible skin damage.
• The cuffs of the sleeves are fastened with a loop and buttons, with the ability to adjust in width.
• The shirt jacket is completed with a set for minor repairs: flame-retardant threads, buttons and main fabric.
• The minimum garment density of 160 g/m² will provide additional comfort in hot weather.

Fabric: aramid heat resistant and fireproof with oil and water repellent finish, material composition: 93% metaaramid, 5% paraaramid, 2% antistatic yarn, density 160  g/m².
Color: cornflower blue.
Sizes: 88-92 to 128-132, Heights: 170-176 to 182-188.

! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link

TR CU 019/2011

On special orders, VOLT shirt jackets made of aramid fabric with a density of 190 g/m² can be supplied.