VOLT z 220-55
heat-insulated work suit

• Protection level 6
• ЗЭТВ 76 cal/cm² - protection against thermal effects of an electric arc, the value of arc thermal effect
• То (А1+А2) - protection against high temperatures, against short-term exposure to an open flame
• Тт (protection level B3) protection against high temperatures, convective heat
• Ти (protection level C3) protection against high temperatures, radiant heat
• Тнв, Class 3 (4)  protection against reduced air temperatures and wind
• Ми – protection  against mechanical impact, chaffing
• З –  protection against general industrial contamination

The fabrics used for the manufacture of the suit provides heat-insulating properties that conform to class 3 (4) for operation in IV and Special climatic zones.
Elements of increased visibility made of retroreflective material allow a person being noticeable in conditions of insufficient visibility.
The work suit is completed with a set for minor repairs: flame-retardant threads, buttons and main fabric.

Jacket

• Straight fit jacket with set-in insulating lining.
• The central concealed fastener with a two-way zipper with a storm flap prevents wind and snow ingress inside.
• Turn back collar.
• The inner part of the collar is made of fire-retardant fleece ensuring a comfortable wear.
• At the top of the side, the label "BUTTON UP!” - an additional warning sign for a person.
• Elastic band at the bottom of the sleeve to provide a snug fit.
• The inner part of the sleeve with a knitted storm cuff allows you to stay warm inside the garment.
• Adjustment at the bottom of the jacket (drawstring) allows you to reduce the wind blowing inside the garment.
• Pockets:
  • 2 breast pockets with velcro flaps and volume on the side of the sleeves, at the top of the right pocket there is a loop for fastening a badge or a walkie-talkie;
  • 2 side patch pockets with Velcro flaps and volume on the side of the central fastener;   
  • 1 inner pocket on the left, for documents, with Velcro fastening. 
• There is a chevron with pictograms of protective properties on the pocket flap on the left.

Trousers

• Straight fit trousers with set-in insulating lining.
• Front zipper.
• High waist with insulated back and elastic band provide a good fit and reduce the likelihood of wind blowing inside the garment when working at height.
• The straps are adjustable with an elastic band and are fastened with buckles, which is convenient for double heights.
• Loops for wearing trousers with a belt.
• Pockets:
  • 2 side slant pockets.
• Knee pads with darts for volume and undercut under the knee - provide comfort when working in a sitting position and freedom of movement.

Hood

• Detachable insulated helmet compatible hood, fastened to the jacket with buttons.
• Velcro chin strap and visor for comfort in bad weather conditions.
• On the back of the head, the hood is fixed with a textile contact tape (Velcro) - for height adjustment.
• Drawstring along the face opening, with two-way adjustment provides a snug fit and additional protection from wind and cold.

Fabric: aramid heat resistant and fireproof with oil and water repellent finish, material composition: 93% metaaramid, 5% paraaramid, 2% antistatic yarn, density 220 g/m².
Insulation: non-woven fabric, thermally bonded, index 3, surface density 150 g/m².
High-visibility elements: retroreflective fireproof tapes of 50 mm wide and inserts.
Color: Color: cornflower blue, trimming - dark blue, red.
Sizes: 88-92 to 128-132, Heights: 170-176 to 182-188.

! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link

TR CU 019/2011

On special orders, winter suits "VOLT" can be supplied with protection up to 57 cal/cm² (1(2) class) and up to 100 cal/cm² (3(4) class).

Тнв, Class 3 (4)  protection against reduced air temperatures and wind