FARMER
PVC knee-high boots

The boots are made by one-component injection molding.
The materials used include molded polyvinyl chloride (PVC) plastic compound with a nitrile rubber content of 10% with different technical characteristics for the upper, intermediate layer of the sole, outer sole.

• The boots are lined with polyester fabric.
• The removable insole(footbed) is made of needle-punched non-woven fabric.
• To protect against impacts in the toe part, internal protective steel toe caps with an impact strength of 200 J are used.
• Two-layer oil-, gasoline- and acid-alkali-resistant outsole (resistant to aggressive materials, such as oils and petrochemicals, acid and alkali solutions with up to 20% concentration).
• The intermediate layer of foamed polyvinyl chloride has shock-absorbing properties and dampens shock loads.
• Chafing and deformation resistant outsole.
• The 5.0 mm cleated outsole ensures good traction on various surfaces providing protection against sliding on oily wet surfaces and the angle-wise cleat pattern provides self-cleaning of the sole. Special heel design provides high energy absorption of the heel.

Water resistant.
The range of sizes and widths ensures comfort and fatigue-free working throughout the day.

Upper: PVC + nitrile rubber.
Lining: polyester.
Protective steel toe cap 200 J.
The removable insole(footbed) is made of needle-punched non-woven fabric.
Midsole: foamed PVC + nitrile rubber.
Outer sole: PVC + nitrile rubber.
Cleats depth: 5 mm.
Assembly: molding.
Height: 383 mm.
Color: white.
Manufactured in: Russian Federation.

TR CU 019/2011