NEOGARD-2
men's high-ankle boots for welding, with high quarters

• Boots are manufactured by direct molding of the polyurethane and nitrile rubber sole.
• The shoe upper is made of genuine heat-resistant leather (1.8–2.0 mm thick).
• Half-bellows tongue flap made of genuine leather is additionally closed with a valve (outer tongue) made of heat-resistant Russian leather with instep natural leather closure straps fastened with buckles, which prevents sparks, splashes of molten metal, and scale from getting inside.
• The soft genuine leather cuff provides comfortable wear.
• The lining of the vamp is made of non-woven needle-punched fabric, the lining of the quarters, tongue and cuffs (soft edging) is polyester lining fabric, a split leather pocket for shoes lining.
• Fabrics of the insole absorbs moisture effectively making the boots comfortable to wear.
• Fire-resistant threads are used in the production of shoes.
• Composite toe cap protects forefoot against impacts of 200 J (MIL 200) due to a special pad that prevents pressure on the foot.
• Two-layer oil-, gasoline- and acid-alkali-resistant outsole (resistant to aggressive materials, such as oils and petrochemicals, acid and alkali solutions with up to 20% concentration).
  • Shock-absorbing polyurethane midsole reduces shock loads and makes the footwear light, comfortable and highly heat-resistant.
  • The lower layer of the outsole is made of wear-resistant, heat-resistant (60 s / 300°С) and frost-resistant (–45°С)  nitrile rubber, which additionally resistant to deformation and chafing.
  • The 5 mm cleated outsole ensure good traction to various surfaces providing protection against sliding on wet oily and icy surfaces and the angle-wise cleat pattern provides self-cleaning of the sole.
• The range of sizes and widths are manufactured on the basis of the last form used for footwear manufacturing, to ensure comfort and fatigue-free working throughout the day.

Upper: genuine leather.
Lining: mesh polyester.
Protective composite toe cap (200 J).
Removable insole (footbed):  polyurethane+polyester+polypropelene foam with carbon inclusion.
Outsole: PU / nitrile rubber.
Cleat depth: 5 mm.
Assembly: molding.
Fastening type: quick take off buckles
Height: 20 cm.
Width: 9 m.
Weight: 800 g.
Sizes: 41 to 50.

TR CU 019/2011

Sizes 38, 39 and 40 can be manufactured by special order