ТА50FR
fire resistant body harness

Fire resistant full body harness with a belt and a dorsal and a sternal attachment points and two lateral attachment points for work positioning. The harness is intended for welding and hot works at height.

Design features:

• This safety harness is made from modern flame resistant Nomex®/Kevlar® materials.
• The harness withstands a single effect of open flame during 15 seconds and a molten metal splash.
• Flame-retardant.
• The dorsal attachment point has a long strap for easy attachment of the webbing to the fall arrest system.
• Special C-shape stitching on areas where straps connect to increase webbing wear resistance.
• An identification label in the form of a book allows recording information on PPE inspections.

Operating temperature: from -60 to +50 °С.
Materials: Nomex®/Kevlar®, galvanized steel, buckles and snaps - coated aluminum.

Sizes:

• Torso length measurement: 55-80 сm.
• Chest circumference: 75-120 сm.
• Girth: 90-120 сm.
• Thigh circumference: 50-80 сm.

Weight: 1600 g.
Static strength: at least 15 kN
Tested with a load of  150 kg.

ТR CU 019/2011
GOST R EN 361-2008
GOST R EN 358-2008
GOST R 53268-2009 (9.8, 9.9)
EN 361
EN 358