Women's boots Neoguard-2® insulated

• The boots are made of polyurethane and nitrile rubber-based soles by injection molding.
• Natural leather with a thickness of 1.8-2.0 mm is used as materials for the upper of the shoe.
• The cuff (soft edging) made of a material with water-repellent properties creates comfort and convenience in wear.
• Lining and removable insole made of natural Alaska fur (pile height 14 mm).
• There is a finish made of reflective material.
• For protection in the toe part of the foot, internal protective socks made of composite material with an impact resistance of 200 J (Mun 200) are used, equipped with a gasket that prevents the upper edge from pressing on the foot.
• The sole is two-layer (resistant to chemical factors - oil, petroleum products, acid solutions of concentration up to 20%, alkali solutions of concentration up to 20%).
  • The upper layer of polyurethane has shock-absorbing properties, absorbs shock loads, and also gives the shoes lightness, comfort and increased heat-protective properties.
  • The bottom layer is made of wear-resistant, heat-resistant (at short-term (60 seconds) contact with heated surfaces up to +300°C), frost-resistant (-45°C) nitrile rubber, resistant to deformation and abrasion.
  • The depth of the profile (tread) of the running layer of the sole is 5 mm and the elements of the sole provide protection against slipping on greasy, wet surfaces, and the angled tread pattern ensures self-cleaning of the sole from dirt.
• The full-size characteristics of the last used in the production of shoes provide comfort in wear and allow you not to feel tired throughout the working day.

Neoguard-2® women's leather boots with a lining of natural fur complete with clothing and other PPE that provide proper thermal insulation are recommended for use in I-II, III, IV and Special Climatic Zones.

 

Upper: genuine leather.
Lining: natural fur.
Protective toe cap: composite material (Mun 200).
Removable insole: natural fur.
Outsole: PU / Nitrile Rubber.
Tread depth: 5 mm.
Mounting method: casting.
Fullness: 10.
Color: black.

TR CU 019/2011

Approximate gross weight: 1.67 - 2.34 kgApproximate
gross volume: 0.016560 m3.