TIROL
protective gloves against low temperatures, general industrial contamination and mechanical impacts

Model features: protective insulated gloves of anatomical design for the use at low temperatures and protection against general industrial contamination and mechanical impacts (abrasion).
To provide protection against cold, the gloves contain 180 g/m2 Fiberfil insulation with a layer of moisture-proof membrane material. On the back side and in the area of the fingers, an additional layer of Thinsulate® G100 insulation is located.
The gloves are equipped with a width adjustment by the wrist strap. In addition, the edge of the cuff is adjusted using an elastic cord with a lock. The gloves are reinforced with a PU coating in the palm area for a good grip and a microfiber overlay in the thumb area.

Primary scopes of application: low temperature - the environment that causes cooling of a worker, characterized by a combination of physical factors (air temperature and humidity, wind speed), protection against which requires the use of personal protective equipment. TIROL protective gloves are designed for using in climate zones I, II, III, IV and the Special climate zone. For occupations that involve working outdoors during the winter season.

Base material: nylon.
Outer coating material: polyurethane, microfiber (in the thumb area).
Model: stitched gauntlet.
Design: cut and sewn.
Reinforcement patch: microfiber in the thumb area.
Coating area: in the palm area.
Coating style: relief.
Inner design: 100% polyester.
Insulation: polyester (Fiberfil 180 g/m2), Thinsulate® G100.
The operation range of temperature: from -5 °С to +40 °С.
Length: 310 mm.
Color: black.
Manufactured in: China.
Sizes: 8, 9, 10, 11.

! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link

TR CU 019/2011