Prisma-2
PVC boots

This item is unavailable in Europe region.

Boots are made by injection molding.
The materials used are molded polyvinyl chloride (PVC) plastic compound with a nitrile rubber content of 10% with different technical characteristics for the upper, intermediate layer of the sole, running layer of the sole.
Tube knitted (polyester) from polyester threads.
Insole - textile material, needle-punched non-woven fabric.
To protect against impacts in the toe part, internal protective socks made of metal with an impact strength of 200 J (Mun 200) are used.
To protect against punctures, puncture-proof metal gaskets are used with a through puncture resistance of a package of shoe bottom parts of at least 1200 N.
The sole is two-layer oil and petrol resistant, acid and alkali resistant (resistant to chemical factors: oil, oil products, acid solutions with a concentration of up to 20%, alkali solutions with a concentration of up to 20%). The intermediate layer of foamed polyvinyl chloride has shock-absorbing properties, dampens shock loads. The running layer is resistant to deformation and abrasion.
The 5.0 mm tread height of the outsole provides protection against slipping on greasy, wet surfaces, and the angled tread pattern ensures that the outsole is self-cleaning from dirt. Special heel design provides high energy absorption of the heel.
Boots are waterproof.
The full-size characteristics of the lasts used in the production of shoes provide comfort in wearing and allow you not to feel tired during the whole working day.

Upper: PVC + nitrile rubber.
Lining: polyester.
Protective toe: metal (Moon 200).
Insole: textile material, needle-punched non-woven fabric.
Puncture protection gaskets: metal (1200 N).
Midsole midsole: PVC foam + nitrile rubber.
Sole running layer: PVC + nitrile rubber.
Tread depth: 5 mm.
Fastening method: molding.
Height: 383 mm.
Color: blue.
Manufacturer: Technoavia.
Country of production: Russian Federation.

TR CU 019/2011