ICEGARD GOR
high quarter leather boots with GORE-TEX membrane

• The boots are manufactured by direct molding of the polyurethane and nitrile rubber sole VIBRAM with anti-slip inserts ARCTIC GRIP PRO onto the shoe upper.
• The upper is made of  genuine hydrophobic  leather (1.8–2.0 mm thick). Half-bellows tongue flap prevents any ingress of small objects, splashes and dust. It is made of genuine leather and wear-resistant and water-repellent ON DURA RETOR  fabric. The soft genuine leather cuff provides comfortable wear.
• GORE- TEX lining ensures water vapor permeability, allowing your feet to stay dry, and sustains microclimate inside the footwear.
• The molded biomecanic footbed made of foamed polyurethane, non-woven material with a metallized film and an upper layer of MUESLI material effectively absorbs moisture and provides comfort when worn.
• Composite toe cap protects forefoot against impacts of 200 J (MIL 200) due to a special pad that prevents pressure on the foot.
• Two-layer sole is resistant to chemical factors, such as oils and petrochemicals.
  • Shock-absorbing polyurethane midsole reduces shock loads and makes the footwear light, comfortable while insuring excellent heat-shielding properties.
  • The bottom layer of the outsole is made of wear-resistant, heat-resistant (300°С / 60 s) and frost-resistant nitrile rubber VIBRAM, with anti-skid inserts  ARCTIC GRIP PRO which additionally is resistant to deformation and chafing.
  • The 5 mm cleated outsole ensures good traction on various surfaces providing protection against sliding on oily, wet and icy surfaces and the angle-wise cleat pattern ensures self-cleaning of the sole.
• The boots are recommended for outdoor jobs in climate zones  I-II, III, IV and a special climate zone when completed with the outfit providing relevant thermal insulation.
• The range of sizes and widths of the footwear ensures comfort and fatigue-free working throughout the day.

Upper: leather.
Lining: laminated material Gore-Tex 3 XL Kelvin 650.
Membrane: Gore-Tex.
Insulation: artificial (6 mm thick polyester).
Toe cap: protective composite toe cap (MIL 200).
Removable insole (footbed): the molded biomecanic (biomechanical) footbed made of foamed polyurethane, non-woven material with a metallized film and an upper layer of MUESLI material effectively absorbs moisture and provides comfort when worn.
Outsole: two-layer sole (PU / nitrite rubber).
Cleats depth: 5 mm.
Assembly: molding.
Fastening type: laces.
Height: 220±5 mm.
Width: 11.
Sizes: 36 to 48.

TR CU 019/2011