Jacket conforms to class 2 of high visibility clothing
Dual-purpose heat-insulated jacket: 1 set-in insulation layer and 2 detachable insulation layers, allowing for wear in autumn and spring. Fastener double-slider zipper and a Velcro storm flap. Inside fleece liner in the upper part of the storm flap. D-rings with Velcro tabs for hem adjustment. Comfortable patch breast and side pockets. Features a detachable hood. Funnel neck is insulated with high-quality fleece (manufactured in Spain). Cuffed sleeves with inside wool blend rib-knit storm cuffs. Retroreflectivå and fluorescent fabrics around the body and sleeves. Additional retroreflectivå and fluorescent tapes on the right shoulder and on the hood allow the wearer to be seen from above even in darkness an important feature for airport technical services. Areas that often get dirty bottom of the jacket, sleeve cuff, are made of dark material.
Main fabric: 100% polyamide, membrane: (water resistance 3,000 mm waterproof rating, water vapor permeability 3,000 g/m2 per 24 hours), oil-water repellent DuPont Teflon® finish, windproof, breathable, cold-resistant, density 110 g/m2.
Fluorescent fabric: ABSOLUTE (100% polyester), membrane: (LT-membrane, water resistance 6,000 mm waterproof rating, water vapor permeability 6,000 g/m2 per 24 hours), windproof, breathable, cold-resistant, with water-repellent finish, density 170 g/m2. Conforms to European standard EN 20471 for high visibility clothing.
Insulation: FEELGOOD, 100 g/m2, 3 layers.
Liner: 100% polyester.
Retroreflective material: high-quality retroreflective tape (5 cm wide) for maximum visibility.
Color: fluorescent yellow with dark blue.
Sizes: 88-92 to 128-132, Heights: 158-164 to 194-200.
! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link
TR CU 019/2011
Class 4 protection against reduced air temperatures and wind
