NEOGARD
men’s knee-high boots combined with multi-layered insulator

Boots are manufactured is manufactured by direct molding of the polyurethane and nitrile rubber sole.

• The shoe upper is made of  genuine "Russia" leather (1.8 - 2.0 mm thick).
• The collar is made from water-repellent material (100% polyester). Its width is adjustable with a buckle ensuring a tight fit of the collar to the leg; the flap made from genuine leather prevents an ingress of dust, snow and moisture inside. The collar features a drawstring fastener in the upper edge to prevent an ingress of snow and sundries inside.
• Multi-layered insulation material for lining and removable insole.
  • Vamp lining and heel counter is made from trippled material (faux fur on knitted base layer with wool blend fleece (70% wool , 30% polyester fiber, density 640 g/m², pile height 14 mm), metallized film - foil with polypropelene lining). Heel lining features a split pocket with a pad made from unwoven fabric.
  • Collar lining is made from trippled material (faux fur on knitted base layer with wool blend fleece (wool 70%, 30% polyester fiber, density 640 g/m², pile height 14 mm), synthetic insulation material, metallized film).
• Composite toe cap protects forefoot against impacts of 200 J (MIL 200) due to a special polyurethane pad that prevents pressure on the foot.
• Two-layer outsole (resistant to chemical factors, such as oils, petrochemicals, alkali with a concentration of up to 20%).
  • Shock-absorbing polyurethane upper layer of the outsole reduces shock loads and makes the footwear light, comfortable and highly heat-resistant. The toe has an additional polyurethane protective patch.
  • The outsole is made of wear-resistant, frost-resistant (−40°C) and heat-resistant (300°C / 60 s) nitrile rubber, which additionally provides enhanced resistance to deformation and chafing.
  • The 5.0 mm lug sole ensures good traction to various surfaces and the angle-wise tread pattern provides self-cleaning of the sole.
• The range of sizes and widths are manufactured on the basis of the last form used for footwear manufacturing, to ensure comfort and fatigue-free working throughout the day.

Upper: genuine leather.
Lining: multi-layer material.
Inside protective toe cap: composite (MIL 200).
Outsole: two-layer sole (polyurethane + nitrile rubber). Resistant to short impact of high temperatures (300°С for 60 s).
Assembly: molding.
Color: black.
Height:  370±5 mm.
Width: 10.
Sizes: 41-47.

! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link

The boots are recommended for outdoor jobs in climate zones  I-II, III, IV and a special climate zone when completed with the outfit providing relevant thermal insulation.