Icegard
high quarters insulated boots

ICEGARD high quarters insulated boots are made by molding the sole of polyurethane and nitrile rubber VIBRAM with anti-slip inserts ARCTIC GRIP PRO.

• Natural leather with a thickness of 1.8–2.0 mm is used as material for the shoe upper. The tongue valve which excludes the ingress of snow, small objects, splashes, dust, is made of genuine leather and ON DURA RETOR material, that is resistant to abrasion and has water-repellent properties. The cuff (soft edging) made of genuine leather creates comfort and ease of wear.
• Lining and insole are made of multi-layer insulation (natural fur "Alaska" (pile height 14 mm) and Shelter B-200 with a metalized film (foil)).
• Reflective finish is available.
• Internal protective socks made of composite material with an impact strength of 200 J (MIL 200) are used for the forefoot protection
• The sole is two-layers (resistant to the effects of chemical factors – oil, oil products).
  • The upper layer of polyurethane has shock-absorbing properties, absorbs shock loads, and also gives the shoe lightness, comfort and increased heat-shielding properties.
  • The bottom layer is made of wear-resistant, heat-resistant (300&geg;C with short-term (60 s) Contact with a heated surface), frost-resistant nitrile rubber VIBRAM, with anti-slip inserts ARCTIC GRIP PRO, resistant to deformation, abrasion.
  • The depth of the profile (tread) of the running layer of the sole of 5 mm and the anti-slip elements of the sole provide protection against slipping on greasy, wet and icy surfaces, and the tread pattern located at an angle ensures self-cleaning of the sole from dirt.
• ICEGARD high quarters boots are lined with multilayer insulation (natural fur and Shelter B-200 with a metallized film (foil)) complete with clothing and other PPE that provide proper thermal insulation, are recommended for use in I-II, III, IV and "Special" climatic zones.
• The full-size characteristics of the last used in the manufacture of shoes provide comfort to wear and allow you not to feel fatigue during the whole working day.

Shoe upper: leather.
Insulation: multilayer insulation (natural fur, Shelter B-200, metalized film).
Protective toe cap: composite material (MIL 200).
Sole: double layer (PU / Nitrile rubber).
Tread depth: 5 mm.
Fastening method: injection molded.
Closre system type: laces.
Height: 225 ± 5 mm.
Sizes: 36 to 48.

! In order to learn how to choose correct size you have to refer
to size charts with instructions by clicking the following link

TR CU 019/2011