ALASKA-2
men's heat-insulated jacket

Straight-fit jacket with an elongated back, with three-layer non-detachable insulation.
The hood is insulated, set-in, with volume adjustment in two directions; removable trim fastened with a zipper and snap-buttons.
A detachable faux fur trim and a high chin part of the hood protect the face from precipitation and wind.
Central fastener with a strong two-way zipper with a windproof valve, which is fixed with secret snap buttons. Double slider zipper allows unzipping from the bottom for convenient driving and working in a sitting position.
The sleeve construction corresponds to the main position the arm takes while working, making it more comfortable to work and therefore the arms get less tired.
The bottom of the sleeve is adjustable in width with pats with a secret button. The ends of the sleeve straps are protected by branded silicone holders.
Rib-knit storm cuffs inside the sleeves keep you warm.
Drawstrings at the waistline and at the bottom of the jacket allow you to adjust the volume, providing a better fit and additional protection against wind and cold.
The powder skirt is fastened with buttons along the waistline. Latex ribbing at the bottom of the skirt ensures a snug fit. When the skirt is unbuttoned, its ends are carefully fixed with buttons and special straps.

Pockets:

• 2 breast oblique-vertical with zippers, closed with flaps;
• 2 lower ones with volume, with flaps on snap buttons, with two openings – from above and from the side, the side opening is fixed with a secret snap button;
• 1 on the top of the left sleeve, with volume and Velcro flap, decorated with a black silicone chevron;
• 1 inside A4 breast pocket with a zipper under the outer flap – no need to unbutton the jacket to get your documents;
• 2 inside zipped pockets in the breast area;
• 1 inner, located at the bottom left, made of mesh, pulled together with elastic band on top and fixed with a button.

Silicone straps – special holders with branding, protect and decorate the ends of the straps on the sleeves and the flaps of the lower pockets.
To increase visibility at night, a black reflective piping is provided, located under the yokes and in the lower part of the sleeves in front and back – it perfectly indicates the position of a person in the dark.

Outer layer fabric: POLYRIB H (100% polyamide), membrane (Lt-membrane™, water resistance – 6,000 mm waterproof rating, water vapor permeability – 10,000 g/m² per 24 hours, windproof, breathable, cold-resistant, water repellent coating, density 180 g/m².
Insulation: FEELGOOD MICRO, 400 g/m², (150 g/m², 2 layers + quilted, 100 g/m².
Hood trimming: faux fur.
Liner: 100% polyester, quilted.
Retroreflective elements: black retroreflective piping .
Color: black, lining – bright-orange.

TR CU 019/2011